1.75mm diameter Grey ABS filament requires a printing plate heated to between 70 and 100°C and an extrusion temperature between 220 and 260°C.
This ABS filament was chosen for its high quality and impressive results observed on parts printed in 3D. It has very good adhesion to the 3D printing plate, a regular diameter and gives off only a very slight odour during extrusion.
The filaments are compatible with 3D Printers using 1.75mm diameter filament, with a dimensional accuracy of +/- 0.05mm.
Strong, durable filament
Heated bed necessary
Low shrinkage rate
Suitable for a range of 3D FDM Printers
ABS is a tough and durable thermoplastic which can withstand high temperature.
eSUN ABS 3D Printer Filament Vacuumed Sealed with Desiccant
This product is the original ABS filament which can be polished using Acetone.
|Printing temperature||220-260 ℃|
|First layer temperature||235 ℃|
|Print base material||Acrylic/ABS|
|Packing||1kg /spool,12 Spools/ctn.|